Calibration chains

Dynamic accuracy verification of belt scale and weigh belt feeder

  • Dynamic accuracy verification of belt scale and weighing belt feeder
Logo de la marque Hasler

Calibration chains (CLM85 and CLM90) are essential accessories to any user of conveyor belt scales or weighbeltfeeders.
It’s often very difficult to check the dynamic accuracy of a beltscale or a weighbeltfeeder installed in a continuous production line if there is no material deviation possibility for a drop test.
Each CLM calibration chain consists of 1 hanging shaft with hook and several roller segments. The segment pitch is selected according to the weighbridge length.

  • For a short weighbridge, choose a segment with 100mm pitch
  • For a long weighbridge, choose a segment with 200 mm pitch.

The required total calibration chain length is defined according to the weighbridge length.

  • 2 available pitches depending on weighbridge length
  • Double chains for belt width > 1 meter

Chain types

There are 3 possible material qualities: steel, cast iron or stainless steel.

The segment pitch is either 200 mm or 100 mm
A range of weight per meter is available as standard.

Type CLM85

Materials : Cast iron or stainless steel.
Standard lenghts : 4.2, 5.2, 6.2 and 7.2 m (others on request)
Pitch : 200 mm

Weight per meter (kg/m) 30 40 50 65 80
Width (mm) 185 200 215 230 245

(Other weights per meter on request)

 

Type CLM90

Materials : Steel or stainless steel.
Standard lenghts : 2.6, 3.2, 4.2, 5.2 m (others on request)
Pitch : 100 mm

Weight per meter (kg/m) 30 40 50 65 80
Width (mm) 185 200 215 230 245

(Other weights per meter on request) 

Détermination of the chain weight per meter of chain

Depending on the nominal belt load (kg/m) on the beltscale or weighbelt feeder, the weight per meter of the chain will represent :

  • 80% - 110% of the nominal belt load for weighbelt feeders
  • 50% - 100% of the nominal belt load for beltscales


L = Length
w = Width
P = Pitch

Double chain

For belt widths larger than 1 meter, choose a double chain.

Calibration certificate

On request at the time of order, HASLER Group will provide a calibration chain certificate issued by the Weights & Measure Authority.

Download technical sheet

    Video